Turnover basket cleaning machine equipment introduction

Equipment introduction:

1.Turnover basket cleaning machineHigh pressure spray washing is the main cleaning method, hot alkaline water at about 60 ℃ is the main detergent, and high pressure hot water at about 60 ℃ is the main cleaning force. After the hot alkaline water spray, add a brush to brush the left, right and bottom of the basket to improve the cleanliness;

2.Turnover basket cleaning machineIt is composed of hot alkaline water spray section, scrubbing section, hot water spray section, clean water spray section, disinfectant spray section and drying section, among which scrubbing section, disinfectant spray section and drying section can be set according to customer requirements.

3. After manually adjusting the concentration, add the disinfectant in the disinfection water tank, and set the steam heating pipe or electric heating pipe in the alkali water tank and the hot water tank respectively. The water temperature of the two water tanks is automatically controlled and can be set arbitrarily from normal temperature to 100 ℃. (Normal temperature water can also be used to increase the washing intensity.) 4. Each circulating water tank adopts a pressurized centrifugal pump for circulating spray, and the hanging basket is sprayed and washed at the same time in four directions from top, bottom, left and right. Each water tank is equipped with two filtering devices to facilitate cleaning of stolen goods at any time. Each water tank is equipped with a separate sewage cleaning valve. At present, the specifications of the turnover baskets used in the market are different. The traditional turnover basket has a width of 300-430mm and a height of 150-300mm. Specially designed and customized according to the actual frame size.

Turnover basket cleaning machineSuitable for cleaning biscuits, candy, meat, aquatic products, vegetables and other food processing enterprises. The whole machine is made of SUS stainless steel. The stainless steel hot water cleaning pump can replace the traditional manual cleaning operation. It can meet a large number of food cleaning requirements of different food companies. It has stable performance, stable operation, simple installation and maintenance, high production efficiency, and good cleaning effect. Features such as low energy consumption and long service life. in addition,Turnover basket cleaning machineAccording to the different requirements of customers.

Turnover basket cleaning machineBasic structure and working principle

The basket of the equipment to be cleaned enters the cleaning tunnel from the input end of the cleaning machine, and completes the cleaning process through pre-washing, main washing, rinsing, and output.

In the pre-washing process, the water pump sucks water out of the pre-washing water tank, and then sprays it through the nozzle, so as to clean all the surfaces of the basket and wash away the debris. The cleaned sewage is filtered and separated and then returned to the water tank, and the sundries are discharged.

During the main cleaning process, warm water is sucked out of the main cleaning water tank by a water pump and sprayed through a nozzle, thereby cleaning all surfaces of the basket and removing residual debris and oil. The cleaned sewage flows back to the water tank after filtration and separation, and the sundries are discharged.

In the rinsing process, the rinsing water pump sucks water from the rinsing water tank and sprays it through the nozzle to rinse the cleaning agent on the object to be cleaned. At the same time, the object to be cleaned is disinfected, and the water flows to the main rinse water tank.

The conveying system is driven by variable frequency motor, and the cleaning time is controlled by adjusting the motor speed. The machine side guide mechanism can be adjusted to adapt to different specifications of cleaning items.