Manufacturers take you to understand the fruit and vegetable cleaning machine

Fruit and vegetable cleaning machineUsing high pressure bubble water bath cleaning,Fruit and vegetable cleaning machineSupplemented by strong water flow, it is suitable for the cleaning of stalks, leafy vegetables, mushrooms and other materials, especially for the cleaning and desalination of wild vegetables and pickles. The cleaning ability is strong, the cleaning rate is high, and the material is not damaged. It is rotated and pushed to flow to the mesh belt conveyor, and then cleaned on the mesh belt by the high-pressure water flow and transported to the conveyor belt.Fruit and vegetable cleaning machine in additionMotors, bearings and other standard parts, are stainless steel SUS304 material, fully in line with the health requirements of export food. The equipment is equipped with a bubble generating device and a high-pressure injection device to make the material in a tumbling state to remove pesticide residues on the surface of the product. At the same time can add the right amount of chemicals for disinfection and fixation. Floats can overflow from the overflow tank, and sediment can be discharged from the mouth, so as to achieve the purpose of cleaning. This kindFruit and vegetable cleaning machineIt is designed for materials with high shape requirements.

Fruit and vegetable cleaning machineEquipment advantages:

1. All-round and multi-angle cleaning without dead corners, thoroughly remove pesticide residues on vegetables and fruits;

2. Low energy consumption, high output, environmental protection and health;

3. The inner barrel adopts a unique high-tech structure, which can strongly drive the movement of water. At the same time, the surface friction of the inner barrel is small, and it will not damage the skin of fruits and vegetables after washing;

4. Fully automatic control, short cleaning time.

Fruit and vegetable cleaning machineMAINTENANCE AND PRECAUTIONS

1. Power supply: 380V 3KW 50HZ.

2. After receiving the power, please do not directly start the machine completely. You should open the belt first to make sure that the belt is rotating forward.

3. Before work, please add water to the pool 15cm away from the scraper (according to material cleaning requirements and output).

4. Connect the tap water to the spray pipe at the lifting place of the equipment, and then put the appropriate amount of products to be washed in turn.

5. The machine mainly cleans the pesticide on the surface and the sediment impurities in the included angle.

6. Check whether the power cord connection is safe and reliable before use. Start the equipment after the tap water is connected, and put the products to be washed in turn after smooth operation.

7. For each cycle, the equipment should regularly check whether each bearing seat is FL205 and add lubricating oil. If the chain slack time is too long, it should be tightened or replaced in time.

8. The operation of the mesh belt of this machine is manual stepless speed regulation. When starting for the first time, adjust the running speed according to the production needs.

9. Check the reducer oil level bed once a month to see if there is loss, and replace the reducer gear oil every three months.

10. After the mesh belt is used for a period of time, there will be different degrees of looseness. Please lift the feed plate and tighten the lower two tension bolts with a wrench. The net belt should not be too tight.

11. It is forbidden to remove the chain box for use.

12. After using up every day, drain the sewage in the pool and clean the mesh belt and sink with clean water.