Vacuum packaging machine use specification

　　　　vacuum packaging machineCan be vacuum packaging items to prevent oxidation, mildew, moth, decay, moisture, etc., with the development of science and technology, has become unnecessary automatic vacuum packaging machine manual operation, automatic packaging, then automatic vacuum packaging machine What is the use.

1. preparation before use

1. Equipped with power supply that meets the requirements of the model.

2. Check whether the position of the vacuum pump oil surface is correct, if not, adjust it.

3. Ground the machine, turn on the power, turn on the power switch, close the cover, and check whether the vacuum pump is operating normally.

2. pre-use adjustment

1. Select the vacuum degree, the pumping time is 0-99.9 seconds, the digital display is continuously adjustable, the small vacuum machine, the pumping time is 0-60 seconds adjustable, the length of the pumping time can be adjusted.

2. Select the heating temperature, select the required heating temperature according to the material of the packaging bag, and adjust the heating temperature knob to the corresponding position, high, medium and low.

3. Adjust the heating time, the heating time is 0-9.99 seconds, and the digital display is continuously adjustable. According to the packaging material and heating temperature, adjust the heating time knob to select the appropriate heating time.

3. use

1. Turn on the power switch.

2. Open the packaging bag for curling, put the packaging bag with the packaged items into the working room, and put the sealing part on the silicone rubber strip. Do not overlap the bag and turn the bag beads, and press the bag mouth tightly.

3. Hold the handle (or press the edge of the upper cover) and press down on the working room, close the upper cover, the machine will automatically complete the vacuum packaging process according to the program and automatically open the cover.

4. Turn over the packaging bag, take out the packaging bag, and complete a working cycle.

5. When stopping working, turn off the power switch and unplug the power plug to prevent the solenoid valve from burning after charging for a long time.