Some knowledge points of vacuum rolling machine

The vacuum tumbler can make the meat evenly absorbed and marinated, improve the binding force of the meat and the elasticity of the product; it can improve the taste and cross-sectional effect of the product; it can enhance the water retention and increase the output; it can improve the internal structure of the product, Energy saving and high efficiency. The whole machine is made of stainless steel and has a compact structure. Both ends of the roller adopt the rotary cap structure, which maximizes the beating space in the roller, makes the rolling effect uniform, the noise is low, the performance is reliable, the operation is simple, and the use efficiency is high.

The operator of the vacuum tumbler must be trained before he can take up his post. If the tumbler suddenly encounters a failure or other temporary problems during operation, it must not be disassembled without authorization. Must be directed by professionals on site or handled by professionals to ensure safety.

Before the vacuum tumbler starts to run, it is necessary to check whether the wiring of the equipment is normal, and then put the product that needs to be pickled and rolled into the drum of the rolling machine. Large words can be used with winches and small skips, and small batch production can be delivered directly manually. Then, in the feed port, close the sealing cover and start pumping, that is, keep the inside of the drum in a vacuum state. Set the operation panel, the total length of rolling time, the rolling rotation time, and the gap time when the intermediate roller stops rotating. After the setting is completed, you can press the start button to work.

1. Feeding of the rolling machine: start the vacuum pump, and when a certain negative pressure is reached, connect the suction pipe to suck the material.

2. Evacuate with a vacuum pump to maintain the vacuum.

3. Control the running time. The tumbler has a special time setting button, which can be set according to different needs. Make it fully efficient. Time is set from seconds to hours.

4. We can set the scrolling time through the scrolling time on the control panel. The plate bending machine will have a certain interval in the production process and can be customized according to different needs. Convenient and simple. Intermittent time and working time are set separately, and there is an independent time control button.

5. Turn the knob on the control panel to "Run", turn the vacuum pump and inflation knob to "On", and the machine starts to run according to the set mode.

6. To stop the tumbler after work, just turn the knob of the control panel to the stop position. If the working time is set, the machine will automatically stop running after the working time is over.

7. The tail work is unloading and cleaning. After the pressure inside and outside the drum is balanced, the drum will discharge the material. After discharging, clean the equipment, use professional cleaning agent with water, and finally clean with water.