Cleaning and air-drying assembly line: introduction to the use and maintenance of brush rollers for fruit and vegetable cleaning assembly lines

Our company producesFruit and vegetable cleaning lineBasically, bubble cleaning is used, and the brush roller is an essential part. Below we will give you a detailed introduction to how to use the brush roller of the fruit and vegetable cleaning line.

1. Before leaving the factory, the brush roller of the cleaning and air-drying assembly line should be cleaned and packaged. As a lot of broken hair will be produced in the process of making the brush roller, the brush roller should be combed and packaged.

2. Our company will pack its brush roller before delivery, in order to avoid being contaminated by debris and dust during transportation and damage to the brush roller.

3. Customers should pay attention to protect the brush of the brush roller before use, and it is forbidden to put it on the ground or other polluted environment without any packaging.

4. When using the brush roller of the cleaning air-drying assembly line, the pressure should be appropriate. If the pressure is small, the cleaning time will not be clean. The pressure will damage the surface of the product.

5, do not use the brush roller to prohibit it from touching the ground, so as to avoid contamination of the brush roller.

Maintenance method of fruit and vegetable cleaning line

1. Disconnect the power supply of the fruit and vegetable cleaning machine to achieve mechanical and electrical separation;

2. Carefully read the use, cleaning and maintenance parts of the fruit and vegetable cleaning machine in the manual, and understand the structure of the machine;

3. Prepare soft brush, neutral detergent and soft cloth;

4. Open the upper cover of the fruit and vegetable cleaning line and take out the fruit and vegetable cleaning basket;

5. Use neutral detergent with soft cloth to wash the basket thoroughly;

6. Use a soft cloth with cleaning agent to wipe the inside of the machine clean;

7. Clean the exterior of the ozone generator thoroughly with a soft brush;

8. Put the cleaning basket back into the machine;

9. After covering the lid, use a soft cloth to wipe the outside of the machine clean;

10. Check whether the circuit part of the cleaning machine is damaged;

11. Re-connect the fruit and vegetable cleaning assembly line to the power supply and inject appropriate clean water;

　　12、Cleaning air-drying lineTurn on the machine and perform a cleaning procedure to remove moisture.