Vacuum tumbling machine maintenance need to pay attention to four matters

Vacuum tumbling machine in the use of the process is a lot of attention to the need for users to master, only in this way can ensure that there is no problem in the use of the process, but there are many people do not know the use of vacuum tumbling machine and maintenance methods, the following to give you a detailed introduction of the use of vacuum tumbling machine and maintenance methods.

vacuum rolling machine maintenance:

The vacuum tumbler has a simple structure and mainly includes a frame, a roller, a reducer, a vacuum pump, a chain drive, and control electrical appliances. If you still don't understand the structure of the vacuum tumbler, you can refer to the "Structure of the vacuum tumbler Anatomy diagram". From the structure of the equipment, it can be seen that the maintenance of the vacuum tumbler mainly refers to the reducer and vacuum pump. The warranty time of the reducer and vacuum pump is generally one year, which can be replaced unconditionally within one year. If it exceeds one year, it can be repaired or replaced with the manufacturer of the vacuum tumbler. You can also buy it yourself and install it.

Vacuum tumbling machine maintenance matters needing attention:

1. After each work of the vacuum tumbler, open the bottom valve switch of the vacuum oil-water separator, drain all the accumulated water, remove the vacuum suction, clean the vacuum pump oil-water separator, and ensure the smooth flow of the vacuum pipeline.

2. The vacuum pump should be stopped once a month to check the pollution of the oil. If the oil in the vacuum pump has been polluted, the oil should be changed in time. Before changing the oil, the pump must rotate forward for 15 minutes without load. After the oil is heated, stop the pump and unscrew the oil drain plug to drain the dirty oil. Clean the pump with some new oil or inject new oil after cleaning the pump with oil. Refer to the "common faults and maintenance methods of vacuum pump of vacuum tumbling machine".

3. Regularly check the oil level of the reducer. If the oil level is found to be lower than 1/2 of the oil window height, add No. 30 mechanical oil in time.

4. The electrical control box of the vacuum tumbling machine shall be firmly grounded to ensure the safety of electricity use.

We must pay attention to the above matters in the process of using the vacuum tumbler. If there are some faults, we can also deal with them according to the above methods.