The 17 most likely problems of the rolling machine and the corresponding solutions

Roll kneading machine is now used more and more, but due to various reasons, such as improper operation, improper maintenance, etc., many enterprises and individuals who use roll kneading machine often encounter various problems and do not know how to deal with them. In order to help everyone better use the tumbler and solve the faults of the tumbler, the following is a sharing of 17 problems that the tumbler is prone to and the corresponding solutions.

1, roll out silk or messy silk

2. The rotation direction of the rolling head is incorrect; the specification of the rolling head is inconsistent with the steel bar

3. The positioning sleeve sequence is incorrect; whether the rolling head sequence is installed correctly;

4. The roller and positioning sleeve are damaged;

5, does not start

6, empty open, reverse always stop in closed; Power supply is out of phase;

7. The thermal protector plays a protective role and the insurance burns out;

8. The wiring is off and the transformer is burnt out.

9. Whether the control line contact is damaged or in poor contact.

10. Check whether the stop and start button is loose and whether the contact of the button is good;

11. Check whether the limit contact in front of the equipment is in good condition, and whether the contact, line and insurance are damaged (insurance for transformer in and out)

12, no reverse car (reverse)

13. The front travel switch is broken (about 7000 times); the delay relay does not operate;

14, the pressure block pressure stroke switch distance is not enough, the pressure block pressure is not in place or damage the jam;

15. The wiring is off; whether the contact is in poor contact or damaged;

16. Check whether the front limit contact is not in place, whether the closing point is open, whether the opening point is closed and whether the opening point of the time relay is closed;

17. Check the limit behind the machine, whether the closing point is disconnected, check the line point, whether the line is loose, poor contact, damage, disconnection, etc;

The above is the tumbling machine prone to 17 kinds of problems and the corresponding solution, I hope for everyone to use the tumbling machine to help.