Tell me about the long-term placement method of vegetable cleaning machine

Tell me about the long-term placement method of vegetable cleaning machine

If the vegetable washing machine does not need to be idle for one end of time for the time being, daily maintenance and maintenance are especially important at this time, please follow the following methods as soon as possible.

1. Each part of the vegetable cleaning machine adheres to soil, dirt, etc., and is cleaned with warm water and wiped with a damp cloth to maintain the cleaning of machinery and equipment;

2. The dirt and vegetable leaves attached to each rotating part, transmission belt, transmission chain, etc. should be completely removed.

3, each rotating part and friction positive part, sufficient oil to prevent rust.

4, the transmission chain sufficient oil, rust prevention.

How to do a good job of vegetable cleaning machine maintenance maintenance?

1. vegetable cleaning machine features, the main purpose and usual daily maintenance and maintenance

1. Except for standard parts such as motors and rolling bearings, all machinery and equipment are made of stainless steel plate SUS304/2B raw materials, which conforms to the actual food hygiene and safety regulations for entrances and exits. The equipment is equipped with a bubble high-pressure water gun generator to make the raw materials roll, and the surface dirt is removed by washing with cooling circulating water. The suspended substance wool roller and the rotating cage cooperate with each other to guide the overflow tank correctly, and the sediment is discharged from the sewage outlet, so as to achieve the purpose of cleaning. The machine equipment is equipped with 2 manhole doors for convenient removal and cleaning of the machinery. The equipment has the advantages of high cleaning, environmental protection and energy saving, water saving, stable and reliable machinery and equipment.

2. Application: vegetables, fresh fruits, seafood and other granules, fractions, root and stem commodities cleaning, soaking, disinfection, sterilization and color preservation, etc.

3. Easy to use, convenient maintenance and convenient wiring.

2. vegetable cleaning machine use and matters needing attention

1. Usage:

The centrifugal fan and reducer of this machine equipment use 380V three-phase four-wire power supply, which requires more professional welders to carry out wiring operation. Non-certified workers are strictly prohibited from entering the post. Thank you for your cooperation.

(1) Connect the power plug. The connection shall be matched according to the type of power supply. The wrong connection of 380V and 220V is prohibited.

Note: Before draining, check whether the centrifugal fan is rotating smoothly and then draining water. After draining, check whether the conveying belt motor and centrifugal water pump are turned over. If it is reversed, switch off and change lines. Wrong connection is prohibited. (It is forbidden to turn on the centrifugal fan button before the one-on-one pick is not connected, otherwise the water will flow backwards, resulting in the destruction of the centrifugal fan)

(2), open the main power switch, the main power switch selection of emergency stop switch design scheme, to prevent accidents, to the system emergency stop.

(3) Run the fan switch. Because the main reason for the high pressure cyclone, after running this power switch, the centrifugal fan is likely to have a certain noise, will not affect the use of the machine.

(4), running conveyor belt running power switch. (Note: The conveyor belt should run 2-3 minutes after running the centrifugal fan).

(5), steam steam source connection steam channel.

(6), cleaning machine on both sides of the empty very large cleaning area, convenient cleaning cleaning.

2. Common problems of vegetable cleaning machine:

(1), each connection position must be tightened to avoid water leakage;

(2), sewage treatment, must be put into the waterway, to prevent environmental pollution during sewage treatment;

(3), machinery and equipment should be cleaned frequently. Change the oil once every seven days after the reducer is used, the second time it is replaced in three months, and the third time it is replaced in one year. Check whether there is less oil in the middle!

(4). Use the conveyor belt for a period of time, pay attention to the tightness of the conveyor belt. If it is too loose, extend the feeding partition, adjust and tighten the anchor bolts under the feeding partition, adjust the tightness of the conveyor belt, and adjust it to the tightness just after use. (The conveyor belt should not be too tight, otherwise it will endanger the service life of the conveyor belt).