Use and maintenance of air energy dryer

InAir energy dryerIn operation, users should consider the impactAir energy dryeroperation of many factors, of which the stability coefficient is an important aspect. Users can take the following stable precautions to ensure the stable operation of the air dryer. So, let's find out.Air energy dryerUse and maintenance.

　

Air energy dryerThe equipment only needs a small amount of electric energy to drive the compressor to obtain the required high-temperature heat, safety and health, environmental protection, no pollution, no exhaust emissions

　Air energy dryerEquipment composition:

1. Heat source air energy heat pump unit.

2. Dry room insulation room body.

3. Hot air circulation device inside the drying chamber.

4. Automatic dehumidification device.

5. Temperature and humidity intelligent control device.

Take the following precautions to ensureAir energy dryerThe stable operation.

1. When the operator approaches, set the protective cover on the operating parts as stable as possible to avoid accidents.

2. The metal shell of all electrical equipment of the air dryer shall be protected by grounding to prevent electric shock and personal injury in the event of an accident.

3. The main production site lighting power supply adopts cross power supply, and the distribution room and the main site entrance are equipped with emergency lighting.

4. The main technical equipment maintains a wide working face, and the two sides of the transportation equipment maintain an appropriate width, which is convenient for operation, passage and maintenance of personal stability (the main passage and working face are both above 800mm).

5. Set up a centralized control room to control production centrally to ensure the normal start of the system and emergency shutdown in case of an accident.

6. The electrical boxes, cabinets and equipment kilns of non-power plants shall be locked to prevent accidental electric shock.

7. Equipped with all necessary service personnel to ensure the stable operation of the dryer.

8. Auxiliary grounding plate shall be set in power distribution room and distribution point to strengthen grounding protection.

9. For buildings with a distance of more than 15m from the ground, lightning protection and grounding devices shall be provided, and belt type lightning arresters shall be used for lightning protection. Lightning protection grounding, protective grounding and working grounding shall be connected to zero, and the grounding resistance shall not exceed 4.

10. The air dryer drive motor adds overload and short circuit protection to avoid accidental damage to the air dryer.

Check the air dryer device to ensure normal use.

1. Always check the parts that are easy to wear, yellowing, aging and decay.

2, often check the serious pressure, need to clean, replace the air dryer parts.

3, often check the need to adjust the parts, easy to block, leakage, pollution.

4. Always check the indicating device of the air dryer and the protective device that affects the person and the body itself.

The above introduction isAir energy dryerUse and maintenance. If you need to know more, you can contact us at any time! Our company has many years of experience and looks forward to your joining at any time.