Why air can dryer popular?

Why?Air energy dryerPopular?

Why?Air energy dryerPopular?Air energy dryerWhat are the advantages, this article will do a detailed introduction.

Air energy dryerAlso known as heat pump dryer, is the current mainstream drying equipment. It replaces traditional electricity, coal-fired boilers, natural gas boilers, firewood and fuel oil drying equipment. It meets national standards. Commonly used drying equipment.

Air energy dryerThe emergence of, greatly reduces everyone's energy consumption. It is faster and more time-saving than traditional drying methods. In a modern society where labor costs have increased significantly, applications are becoming more common. Here, I will introduce the characteristics of the air energy dryer in detail to deepen your understanding of the equipment.

 Air energy dryerFeatures

1. High efficiency and energy saving

The heat of the heat pump dryer heating air mainly comes from the sensible heat and latent heat contained in the warm and humid air discharged from the recovery drying room. The energy that needs to be input is only the power consumption of the heat pump compressor, and the heat pump can consume a small amount of utility and a large amount of heat, so the heat pump drying device is usually 1.0 ~ 4.0kg /kWh, while the value of the traditional convection dryer is about 0.2~0.6kg/kWh.

2. It can realize the closed circulation drying of low temperature air, and the material drying quality is good.

Through the adjustment and setting of the control system, the temperature of the hot drying air in the drying chamber can be between 20-80 ℃, which can meet the high quality drying requirements of most products; the closed circulation of the drying medium can avoid the possibility of exchange with the outside air. Impurity contamination of materials, which is particularly important for food, pharmaceuticals or biological products. In addition, when the material is sensitive to oxygen in the air (easy to oxidize or burn and explode), inert media can also be used instead of air as the drying medium to achieve oxygen-free drying.

3. Convenient temperature and humidity control

When the material has higher requirements for the temperature and humidity of the air (such as wood, etc.) entering the drying room, the evaporation temperature and condensation temperature of the working fluid in the evaporator and condenser can be adjusted to meet the texture and appearance of the material. requirements.

 Air energy dryerThe advantages:

1. Energy saving, safety and environmental protection!

2. Dry products keep the original quality, original taste and primary color unchanged.

3. The hot air circulation in the drying room is even up and down, without dead corners.

4. Make the product dry evenly at the same time, do not turn and burn in the middle.

The same energy consumption is 8/10 times that of traditional equipment.

There are many kinds of 6. drying items, such as medicinal materials, agricultural products, food, seafood, flowers, industrial drying, etc.

Calculate the actual dry air energy:

1.1 tons of dried white radish pieces

Use 2 12 horsepower dryers to bring 63 cubic meters of drying room

The ambient temperature is 24/25 degrees, and it only takes 4 hours to dry the powder.

The average power consumption of 12 dryers per hour is 12 degrees X2 units = 24 degrees X4 hours = total power consumption 96 degrees

1.1 Tons of White Radish Dried in Sun to Produce 21kg of Dry Goods = 98% Moisture

In other words, drying 1.1 tons of white radish with 98% moisture at an ambient temperature of 25 degrees consumes 96 degrees of electricity in 4 hours.

This cost is very low compared to the current relatively high labor costs, and it can also reduce the time investment and perform rapid drying.