Troubleshooting and Routine Maintenance of Automatic Palletizer

Not only belt conveyor belt deviation may existAutomatic palletizerSimilar problems may occur during operation. So, when encountering a similar phenomenon, what should be done to restore the normal working performance of the stacker?

What you need to know is that whenAutomatic palletizerWhen the conveyor belt is offset, the shift fork fixed on the tapered roller will deflect a viewpoint, and the cross pin is driven by the dial pin to lean against the end of the side roller, and the side roller is braked.Automatic palletizerThe sliding friction is formed between the conveyor belts, so that the roller frame rotates a viewpoint around the vertical axis, so that the belt moves to the center.

If this problem is to be overcome, appropriate improvements are needed.Automatic palletizerof the structure. Advocate the use of strong self-aligning roller frame group, retain the original inverted structure and beam, but the roller is changed to a multi-section structure, and the vertical rollers on both sides are changed to tapered rollers. A seat fork for fixing the tapered roller should be added together, a stopper should be added to the end face of the roller, and a cross pin should be added under the tapered roller.

If the material falls irregularlyAutomatic palletizerOn the conveyor belt, it is easy to formAutomatic palletizerThe deviation of the conveyor belt, so it is necessary to adjust the blanking point of the central drop hopper to improve the deviation caused by incorrect blanking point. Therefore, the baffles on both sides of the feeding chute can swing, and the position of the blanking point can be adjusted by adjusting the screw.

Sometimes,Automatic palletizerThe reasons for the deviation of the conveyor belt are complicated, and only one method is not feasible. You can adjust the idler frame and roller together. Generally speaking, the conveyor belt of the stacker is difficult to straighten during no-load operation. Only when the conveyor belt of the robot stacker is fully loaded can it be judged whether it needs to be adjusted.

Automatic palletizerIt is an organic combination of mechanical and computer programs that provides high efficiency for modern production. Robot palletizers are widely used in the palletizing industry, which greatly saves manpower and space. Flexible and convenient operation, high efficiency, stable work and high work efficiency.Automatic palletizerWhat should I pay attention to when protecting?

1. Need maintenanceAutomatic palletizerThe personnel must be those who often use the machine or have been trained and carefully read the machine operation manual;

2. Remove the air source triple filter, empty the air source pipeline of the purge manufacturer, and then return it to the air source;

3. Before adjusting the stacker equipment, please cut off the power or press the emergency stop button;

4. Check the crane, it is strictly forbidden to lift the crane under the crane;

5. Before the normal operation of the high-level palletizing manipulator, it is necessary to grind the smooth parts with oil to make the operation of the robot palletizing machine more flexible;

6. After power transmission, check whether the power supply is correct.