Products

+
  • 行星搅拌夹层锅2.jpg

Planetary mixing sandwich pot

1072560116806078464


Key words: food machinery


Online Inquiry

features and functions

1. introduction:
The pot body is a hemispherical stainless steel pot body formed by one stamping. The heating method can be in the form of steam, liquefied gas, natural gas, etc. Planetary stirring is a combination of rotation and revolution of the stirring system, and the transmission ratio is an ininteger transmission ratio to ensure that there is no blind spot in the pot. It is a new stirring device.
2. uses:
Planetary mixing sandwich pot is widely used in the processing of candy, pharmaceutical, dairy, wine, pastry, candied fruit, beverage, canned food, marinated food, etc. It can also be used in large restaurants or canteens to cook soup, cook vegetables, stew meat, porridge, etc. It is favored by the stuffing sauce production industry, meat cooked food industry, condiment industry and other processing industries. It is a good equipment for food processing to improve quality, shorten time and improve labor conditions.
3. structure:
The series of products using a stamping forming hemispherical stainless steel pot body, this product with liquefied petroleum gas (natural gas) as the heat source, with a large heating area, high thermal efficiency, material heating fast, uniform heating and heating temperature is easy to control and so on. All food contact parts of this product are made of 0Cr18Ni9 stainless steel and polished, which meets the requirements of the the People's Republic of China Food Sanitation Law. It has beautiful appearance, reasonable design, compact structure, convenient installation, simple operation and easy maintenance.
4. mixing mode:
The mixing system adopts the combination of rotation and revolution, and its transmission ratio is not an integer transmission ratio to ensure that there is no mixing blind spot in the pot. Use the transmission and sealing structure to make the transmission part and the pot clean and sanitary. The automatic/hydraulic type of this series of equipment uses hydraulic thrust to turn over the mixing arm, does not need to disassemble the agitator, and then uses hydraulic thrust to turn over the pot body. It is easy to enter and leave raw materials and save manpower. The stepless frequency conversion governor can mix high-viscosity products evenly and heat to increase heat. It has the characteristics of easy operation, high working efficiency, low energy consumption, long service life, compact structure, convenient maintenance, etc. It is a mixer with excellent performance.
5. features:
Safe, simple, practical equipment beautiful, easy to install, easy to operate, safe and reliable. The temperature is fast, the temperature is high, and the pot surface can reach hundreds of degrees, so that the material can achieve the effect of frying through the Maillard reaction. Full combustion, high thermal efficiency, uniform heating of the pot body, energy saving 40% compared with similar products, the burner is annular, around the bottom of the pot, can be heated by gas, liquefied gas, natural gas.
6. installation steps:
1. Tighten the two set screws of the bracket. When the pot body is shaken, the water inlet and outlet pipes at both ends are not allowed to rotate with the pot.
2, after the installation, the mixing sandwich pot, should be empty test run inspection, until the transmission parts run normally, can be put into use.
3. After air intake, if air leaks at the joint, tighten the nut until it does not leak.
7. use note:
1, the use of steam pressure, shall not exceed the fixed working pressure for a long time.
2. When entering steam, slowly open the steam inlet valve until the pressure is required. If the stop valve at the condensate outlet is equipped with a steam trap, the valve should always be opened; if there is no steam trap, open the valve first until there is steam overflow, then close the valve small, and keep the opening degree until a small amount of water vapor overflows.
3, the safety valve, according to the user's own use of steam pressure, self-adjustment.
4, steam pot in the use of the process, should always pay attention to the change of steam pressure, with the inlet valve timely adjustment.
5. After stopping the air intake, the straight nozzle cock at the bottom of the pot should be opened to drain the remaining water.
6, tilting and stirring type sandwich pot, before each shift use, should be in each rotating part of the oil; Stirring type sandwich pot surface parts, it is recommended to use cooked vegetable oil; Other places are used 30#-40# mechanical oil.
8. maintenance:
1, the inlet pipe and outlet pipe joint leakage, when the screw nut does not solve the problem, should add or replace the packing.
2, pressure gauge and safety valve should be checked regularly, if there is a fault, timely replacement and repair.
3. After 50 hours of use of the reduction gearbox, remove the lubricating oil, flush with kerosene or diesel, add 30#-40# clean engine oil, change the oil for the second time after 150 hours of use, and change the oil every 1000 hours or so depending on the specific situation.
4, anti-rust oil peeling, should be timely brush, paint the paint outside the pot, it is recommended to use X55-3 aluminum ethylene water resistant paint.
5. After the pot has been used for 5 years, it is recommended to carry out a safety hydrostatic test. The interval of hydrostatic test shall be carried out according to the requirements of local technical departments.
The pressure Pwater of the hydrostatic test shall be determined according to the following conditions:
When the rated working pressure P <0.6MPa, P water = 0.15MPa;
When the rated working pressure P = 0.6-0.8MPa,
P water = P amount 0.3MPa
6. The outer pot body of this pot is made of steel plate with a thickness of 4.0~5.5mm, steel grade A3. When the outer pot is thinned to less than 2mm after years of corrosion, it should be stopped.
7. The welding of stainless steel in this pot and the welding of stainless steel and other steel joints shall be made of stainless steel welding rods Austrian 102, Austrian 107, Austrian 132 and Austrian 137, and other brands are not suitable.
Youjia Food Machinery

More needs?

Our dedicated team is here to help you.

Contact Us
Youjia Food Machinery

Contact Us

7*24 to discuss your needs with our team

+86-13345248388

Youjia Food Machinery

Focus on Youjia, pay attention to enterprise information

2186929487@qq.com

Business License

Copyright©2024 Youjia Food Machinery Technology.   Powerby:300.cn  SEO